Lenticular printing software free

This can be checked by simply placing the lens on a flat surface. Lens Selection The lens pitch changes according to the lens thickness, maker, and lot production period. Even when the maker is the same, there is a difference in print ink application and pitch because the environment changes due to production location and season.

Reexamining Lens Storage Methods Lenses can shrink or expand according to changes in season, time, day, etc. When lenses are stored by stacking, there is a difference in temperature between the edges and center portion of the lens, which creates distortion. Store lenses in a constant environment. About Lens Edges The edges of the lenses align differently according to the maker.

The distance between lens ends and grooves differs according to each lens. When adjusting the overall tilt, in order to find the position that is best for printing, check several items that were printed at the same time see Adjusting the Tilt of the Whole Lens 2. For lenticular prints, color registration adjustments are much more difficult than for normal printing. Lenticular RIP software that can also do spiral correction and fan-out correction. Shape of the Lens Top of lens The top surface of the lens has semi-cylindrical convex lenses arranged side by side.

Types of Markers Striped line Striped Lines are vertical lines that surround the four boarders of the printed matter. Adjustment Location Tilt in front of the feeder portion Adjustment Location Lens Surface:Top surface Marker:See the horizontal striped lines Method:Adjust the horizontal lines so that the striped lines become either completely white or black.

Adjustment Location Position and twist adjustment for each unit Confirmation Method Lens Surface:Bottom surface Marker:Determine the five checkpoints on the registration line, and see whether the registration line passes through one lens groove Method:Place the registration line parallel to the lens groove Reconfirm the tilt adjustment of the whole lens see Adjusting the Tilt of the Whole Lens 1 Note The ends of each lens may not be aligned, so check multiple items that were printed together.

About Fluctuation with Each Lens If it is diffi cult to make adjustments because the lens fl uctuation is too great, there may be a problem with the status of the lens sheet For more details, see Reexamining the Amount of Material Lens Sheet Adjusting Color Registration Adjust the color registration.

Confirmation Method Lens Surface:Top surface Marker:See the actual printed matter Method Confirm whether each image can be seen in 3D when viewed from straight on For changing, confirm whether switching is quick and complete Colors do not match There are cases when the desired color is not achieved even when the colors of the color balls match.

This may be resolved by improving the color registration see Adjusting Color Registration Variation according to the position 3D is offset, afterimage remains for change switching If it is crooked or partially switched, the image is tilted. When lenses are wavy If lens curing aging is insufficient, the lens may become wavy see Reexamining the Amount of Material Lens Sheet Streaking Appears There are many possible causes for streaking with lenticular prints.

It is also related to the storage status of the lens sheets, so it may be resolved by reexamining the lens sheets see Reexamining the Amount of Material Lens Sheet When the lens direction is incorrect when feeding paper When the lens quality is bad and edges do not align 4 When Adjustments by Printing are Insufficient If adjustments by printing are insufficient, it is necessary to return to the previous process to make adjustments.

For more details about setting items, see Correcting Registration Offset on the Plate Makes it easy to match color registration From the LentiDotManager [Accessory Information Settings] , when Registration line is set to [Dotted Line] , the lines are offset according to color, which makes it easy to match the color registration. When adjusting the overall tilt, in order to find the position that is best for printing, check several items that were printed at the same time see Adjusting the Tilt of the Whole Lens 2 Adjusting the Printer For lenticular prints, color registration adjustments are much more difficult than for normal printing.

The printing samples of LentiDotManager Ver. Thread starter Baccarda Start date Apr 20, Baccarda New member. Hello everyone Does anyone know a free software to make Lenticular prints? I've found a couple on the internet, but they all are expensive Thanks in advance. Baccarda said:.

Click to expand There's no such thing. It is a bit of a black art to do properly. SZmetana Member. Bear in mind that the imaging of lenticular plates has special requirements as well. Read more about LICs features in the documentation. The LIC software is available free for personal, hobby, educational and evaluation use. See the download page for details. Developed can resolve your all trouble.

The 3D design software can open PSD file, and can convert 2D photos to 3D, and can make 3D photos, flip, animation, morph and zoom etc. The charm of 3D design software are timesaving, excellent and making some lifelike lenticular photos.

Psdto3d 3d design software Registered No. Funcation as follow:. Support large picture, output file can reach 40GB, the lens a few up to S upport CMYK four color,there is no loss when you are printing or outputing. Support 3D puzzles,midline can be aligned automatically,. Supports loop pattern.